Everbuild Cemstrip 1ltr Box Qty 12

This is now a "Discontinued Product"

(Item No Longer Available - No Direct Replacement)

Everbuild Cemstrip  1ltr  Box Qty 12
Authorised Reseller
Authorised Distributor

Free UK Mainland Delivery over £50 ex. VAT!

Discontinued! This item has been discontinued.

Quote Ref: @40196

Product ID: eb_cem1

Manufacturer: Everbuild

Price: 82.99 ex VAT) £99.59 (inc VAT)

99.59 2024-05-19
Error! Sorry there has been a problem adding your items to the cart.

Everbuild Cemstrip  1Ltr  Box Qty 12

Product Description
CEMSTRIP is a new type of cement, concrete and mortar stain remover that provides a more environmentally-friendly and safer alternative to conventional hydrochloric acid based cement removers.

Cemstrip will also remove salts and efflorescence from the surface of mineral substrates and is a very effective general cleaner for removing ingrained dirt, grease and stains from paths and patios.

Cemstrip is a highly concentrated formula that can be diluted by up to 10 times with water to suit a variety of applications.

Cemstrip is non-hazardous in storage, transport & usage and is fully biodegradable.

Benefits
•    Safer to use than conventional Hydrochloric acid based products.
•    Available in bottles or as a ready to use spray.
•    Water clean up.
•    Economical, makes up to 10 times the volume of the bottle when diluted.

Areas For Use
•    Removes cement, mortar and concrete on most mineral surfaces such as paths, patios and walls.
•    Cleaning tools, cement mixers and other building equipment.
•    As a general cleaner for paths, patios and driveways.

Limitations
•    Do not use on Marble, granite or travertine.
•    Do not use on coloured cement based pavers.
•    Always test a small inconspicuous area prior to full application especially on coloured flags/stones.
•    Do not use on soft metals such as lead brass, copper or aluminium.
•    Do not apply to dry surfaces or allow Cemstrip to dry on the surface.
•    Always thoroughly rinse equipment to prevent further rusting/corrosion.
•    Avoid overspray on sensitive surface such as brass, copper, stainless steel and aluminium. Remove any excess material or spills immediately with clean fresh water.
•    Cleaning mortar or concrete from tools – the stronger or older the mix is, the more difficult it will be to remove.
•    Always wash out spray equipment immediately after use with clean fresh water.
•    It is the user’s responsibility to determine suitability for use. If in doubt contact technical services for advice.


Surface Preparation
When cleaning path, patios, cement stains etc. from surfaces always thoroughly wet surfaces prior to application. Do not apply to a dry surface. Always test a small inconspicuous area prior to full application. When cleaning tools and equipment, pre-wetting is not necessary.

Dilution Rates

9 parts water to 1 part Cemstrip -  Cleaning general stains and ingrained dirt from paths, patios and horizontal surfaces.

2 parts water to 1 part Cemstrip – Cleaning light mortar stains from paths, patios, walls or vertical surfaces.

1 part water to 1 part Cemstrip – Cleaning heavy mortar stains from walls or vertical surfaces.

Neat – Cleaning tools, cement mixers and other building equipment.

Application
General Cleaning:
Moisten surfaces with water and apply Cemstrip with brush or low pressure spray (avoiding mist formation) from top of area down to bottom. Leave for 5-10 mins then scrub/wash off with a hose, brush or power washer until the surface is clean. Never allow the product to dry on surfaces. Where a second application is necessary, follow the procedure as above.

Cleaning tools/equipment:
Cemstrip will remove fresh cured cement and wet or semi-cured cement from tools. Spray onto item in question. Leave for 15 mins to act, (light stains) or up to 3 hours for heavy contamination.  Wash off the product with clean water. Utilising a scourer will assist removal of stubborn stains. Use a hot power wash to assist removal of staining from mixing equipment. After removal, always spray tools with Everbuild XT44 Maintenance Spray (or any other proprietary maintenance spray) to prevent further corrosion/rust.

Specific Data
Appearance    Thin green/yellow liquid
Specific Gravity @ 20°C    1.09g/cm³
pH    1.4-1.7
Odour    Acrid
Coverage    Approx. 10m2 per litre depending on porosity of substrate.


Health & Safety
Consult MSDS for full list of hazards.

Storage

KEEP AWAY FROM CHILDREN. Store away from alkaline products and bleach at moderate temps.   

Shelf Life
12 months form date of manufacture.

Brand: Everbuild

Identifier: CEM1


Thank you! Your review has been submitted for approval.

Item Details

Brand new packaged items only.

Comes with a full manufacturer warranty (not including consumable products).

Please make use of any product reviews or youtube clips we have available to learn more about the item.

This item is usually delivered within 5 working day(s).

Website Details

SSL Certified Secure website to ensure secure online ordering.

Please return the item/s if not suitable for a full refund (within 7 working days of receipt).

We guarantee security of all your personal details, we do not pass on any customer information.

Accept all payment methods including all major Credit Cards, Paypal and Amazon Payments.


Ordering

Order online now using our Secure SSL Certified Secure website.

Add this product to your basket and come back at any time to complete the order.

Order by phone on 01737783101.

Order with an official purchase order by emailing sales@sitebox.ltd.uk. We will check your account status or if you do not hold an account we will credit check your organisation, confirm and process your order. Please note the first order(s) will always need to be paid upfront unless you are a government linked organisation. Goods remain the property of Sitebox Ltd until paid for in full as per our full terms and conditions.

Clarke  Synthetic Compressor Oil
Clarke Synthetic Compressor Oil
£18.69 (ex VAT)
£22.42 (inc VAT)
White Spirit 2 Litre
White Spirit 2 Litre
£7.49 (ex VAT)
£8.99 (inc VAT)
Clarke  Filter, Regulator & Lubricator - CMF3
Clarke Filter, Regulator & Lubricator - CMF3
£31.96 (ex VAT)
£38.35 (inc VAT)