Account
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
Found 49 product(s). Showing product(s) 1 to 49.
From The Popular LUMER Range of Site Electrics. The 10KVA is a Single Phase Site Transformer that is Ideal for Site Use With a Wide Range of Site Power Tools and lighting. This 1... read on
110 Volt Only Input 240 AC Output 110 AC Sockets 2 x 16 Amp IP44 Rated - TSTR30 15.3kg unpackaged weight Height 26cm (including handle) 20cm x 20cm lid size (not includi... read on
British Made Quality 5kva Transformer inc 2 x 16a and 1 x 32a sockets Input 240 Volts AC Output 110 Volts AC 5kva Intermittent Use, 2.5Kva Continuous Use Socket... read on
230V Step-up transformer with tough GRP case to withstand harsh conditions for site use. Features 2 x 16A outlets. Enables users to operate 240V 16A tools by attaching to a 110V... read on
Input 240 Volt AC Output 110 Volt AC Sockets 2 x 16 Amp Maximum Rating 1.5kva Continuous Rating 0.9kva 1.6M H07RN-F 3x1.5mm Cable + BS 1363A Plug IP44 Rated ... read on
10 kVA 3ph portable site transformer. Made to comply with reduced low voltage regulations ensuring safe electrical supplies on site. Robust IP23 painted steel case c/w carry hand... read on
3.3kva Step Transformer for use with 240v Powertools and Appliances, designed for use in DIY and Industrial environments. Converts 110v to 240v Input: 110 AC Output: 230 AC ... read on
110V Popular transformer built for demanding construction tasks, where mains voltage needs stepping down and isolating. Tough GRP case with 2 x 16A and 1 x 32A 110V outlets. Res... read on
Wall Mounted A range of transformers mounted in painted metal enclosures, rated IP22 for indoor use. These products are designed with internal terminals on the input side for har... read on
110VLightweight powerhouse with tough, polycarbonate casing, makes easy work of power distribution in harsh environments. Features 2 x 16A recessed sockets that can be used with co... read on
A British made range of transformers for operation from either single phase or three phase models, mains supplies providing 110V Center Tapped Earth (CTE) output for the operatio... read on
The LUMER 3Kva Continuously Rated Heater Transformer is a metal vented transformer ideally used for heating and lighting loads where a transformer is required to be used con... read on
Intermittent Rating 3300VA Wall Mounted A range of transformers mounted in painted metal enclosures, rated IP22 for indoor use. These products are designed with internal ter... read on
Wall Mounted A range of transformers mounted in painted metal enclosures, rated IP22 for indoor use. These products are designed with internal terminals on the input side for har... read on
A British made range of transformers for operation from either single phase or three phase mains supplies providing 110V Center Tapped Earth (CTE) output for the operation of por... read on
Site Transformer 10kVA 230V-110V Air cooled. Heavy-duty steel enclosure. Double wound with safety earth screen. MCB protection against overload. Manufactured to BS(EN) 615... read on
Description Manufacture to BSEN 61558 Thermal overload protection Glass reinforced polyester (GRP) case providing ingress protection to IP44 Output sockets to BS1363,... read on
High quality wall mounting isolating safety transformer, continuous rating 1.6kva For use in fixed installations IP22 Enclosed Manufactured to EN60742 & BS3535 2 x 11... read on
110V Rugged heater transformer with 1 x 16A and 1 x 32A 110V outlets and robust powder-coated metal casing. Steps down and isolates mains voltage. Runs 110V heaters including ce... read on
Description Vented sheet steel enclosure to IP22 for indoor use 2x 25mm conduit entries on case Constant Load Rating Floor /Wall mount fixings 110V output is centre ... read on
Wall Mounted A range of transformers mounted in painted metal enclosures, rated IP22 for indoor use. These products are designed with internal terminals on the input side for har... read on
High quality wall mounting isolating safety transformer For use in fixed installations IP22 Enclosed Manufactured to EN60742 & BS3535 4 x 110 Volt 16 amp outlets... read on
Description Manufacture to BSEN 61558 Thermal overload protection Glass reinforced polyester (GRP) case providing ingress protection to IP44 Output sockets to BS1363,... read on
Single phase double wound safety isolating transformer. Enclosed to IP22. Transformer manufactured to BS-EN61558 where applicable. PRIMARY: 230V 1-Ph hard wired to 6mm² te... read on
Description Vented sheet steel enclosure to IP22 for indoor use 2x 25mm conduit entries on case Constant Load Rating Floor /wall mount fixings 110V output is centre ... read on
Wall Mounted A range of transformers mounted in painted metal enclosures, rated IP22 for indoor use. These products are designed with internal terminals on the input side for har... read on
15 kVA 3ph portable site transformer. Made to comply with reduced low voltage regulations ensuring safe electrical supplies on site. Robust IP23 painted steel case c/w carry hand... read on
Description Vented sheet steel enclosure to IP22 for indoor use 2x 25mm conduit entries on case Constant Load Rating Floor /wall mount fixings 110V output is centr... read on
TMC Transformers Floor Standing or Wall Mounting 230/110V, Enclosed Transformer 10kVA continuous, 230V input to 110Vac CTE, internal terminals - CM10000/FM0/230 Description ... read on
Wall Mounted A range of transformers mounted in painted metal enclosures, rated IP22 for indoor use. These products are designed with internal terminals on the input side for har... read on
3kVA continuously rated unit in an IP22 metal enclosure. Model: CMHT3/11 Continuous Rating: 3.0KVA Output Sockets: 1 No. 32A Intermittent Rating: max... read on
Three phase site transformer to IP44. Primary: 400V 3-Ph 50/60Hz. Protected by a 40A 3P MCB. HArd wired to terminal blocks. Secondary : 110V N.E Fitted with :- 10 x 16A 110V... read on
3.3kva with one 16amp and one 32amp , two outlets... read on
Site Transformer 5kVA 230V-110V Heavy-duty steel enclosure. Double wound with safety earth screen. MCB protection against overload. Manufactured to BS(EN) 61558-2-23. Sp... read on
Wall Mounted A range of transformers mounted in painted metal enclosures, rated IP22 for indoor use. These products are designed with internal terminals on the input side for har... read on
Connexion’s 7kVA Single Phase Transformer 110V is designed to safely convert 240V AC single-phase power to 110V for construction sites, workshops, and industrial applicatio... read on
