Flex WST 700 VV Vario Plus Giraffe® Wall & Ceiling Sander (110/240 Volt)

• VV Electronic Control: Controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
• Using a unique telescopig system, the Giraffe® adapts to your needs
• Length adjustable from 1330 mm - 1730 mm
• Open telescope lock lever, pull out handle and close lever
• Ergonomic design with many different handling possibilities for fatigue-free working
• The motor is always kept between the gripping positions, ensuring a perfect balance
• Fitted with interchangeable heads that are attached and removed with a click
• Including triangular sander head. This is optimally suited to sanding corners and edges
• The random orbital movement of the sanding head takes the abrasive right up to the edges
• Backing pad with hook and loop face
• The articulating sanding head can be adjusted to every tilt and angle
  Vacuum cleaning system: guard with a brush ring, flexible suction hose from the sanding head to the guide tube
• Connection facility at the rear of the telescopic tube for FLEX industrial vacuum cleaner, models S 36 (Which Can Be Found Here), S 47 (Which Can Be Found Here) and S 47 M (Which Can Be Found Here)
• Ideally suited for sanding plaster boards, solid Styropor insulation slabs, preparation for painting, polishing

Supplied With: Triangular Sanding Head, Round Sanding Head, Velcro Sand Paper (60 grit), Velcro Sand Paper (80 grit), Velcro Sand Paper (100 grit), Velcro Sand Paper (200 grit), Hook & Loop Abrasive Paper (angular, K 60), Hook & Loop Abrasive Paper (angular, K 80), Hook & Loop Abrasive Paper (angular, K 100), Hook & Loop Abrasive Paper (angular, K 220), 4 Metre Vacuum Hose, 32, Padded Carry Case

Additonal sand paper can be found here