The long cut depth of these cutters allows them to produce under-cut finger grooves.SpecificationsD=25 mmC=32 mmR=12.5 mmOL=70 mmShank Diameter=1/2 inchGeneral InformationNett Weig... read on
An initial cut with a straight cutter is required to produce the drawer pull profile.SpecificationsD=44.8 mmD2=24 mmC=25.4 mmR=8 mmR2=2 mmOL=64 mmShank Diameter=1/2 inchFor station... read on
An initial cut with a straight cutter is required to produce the drawer pull profile.SpecificationsD=45 mmD2=24 mmC=17 mmR=4 mmR2=2 mmOL=60 mmShank Diameter=1/2 inchFor stationary ... read on
An initial cut with a straight cutter is required to produce the drawer pull profile.SpecificationsD=19 mmC=13 mmR=4 mmOL=48 mmShank Diameter=1/4 inchGeneral InformationNett Weight... read on
An initial cut with a straight cutter is required to produce the drawer pull profile.SpecificationsD=38 mmD2=22 mmC=17 mmR=6 mmOL=61 mmShank Diameter=1/2 inchGeneral InformationNet... read on
Use in two passes from left & right to cut a protruding grip handle.SpecificationsD=22 mmC=17 mmR=1.5 mmR2=2 mmOL=60 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 7... read on
