Cutters with guide bearing reduce setting up time for curved workpieces.SpecificationsD=20.7 mmB=12.7 mmR=4 mmOL=59 mmShank Diameter=1/4 inchGeneral InformationNett Weight (kg): 25... read on
Cutters with guide bearing reduce setting up time for curved workpieces.SpecificationsD=24.7 mmB=12.7 mmR=6 mmOL=63 mmShank Diameter=1/4 inchGeneral InformationNett Weight (kg): 38... read on
For creating a concave radius or cove in the edge of furniture and columns.SpecificationsD=3/4 inchD=19.1 mmC=6.4 mmB=12.7 mmOL=61.0 mmR=3.2 mmShank Diameter=1/4 inchGeneral Inform... read on
For creating a concave radius or cove in the edge of furniture and columns.SpecificationsD=57/64 inchD=22.7 mmC=25/64 inchC=10 mmB=12.7 mmOL=61 mmR=5 mmShank Diameter=1/4 inchGener... read on
This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance.SpecificationsD=25 mmC=20 mmR=13 mmOL=60 mmShank Diameter=1/2 inchGeneral Informa... read on
Ideal for producing nosings and attractive edge moulds.Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging.SpecificationsD=19 mmC=6 mmC2=22 mmR=3 mmOL=62 mmShank... read on
Ideal for producing nosings and attractive edge moulds.Beads Ref. 9/11 has a matching cutter Ref. 8/11 for jointing & hinging.SpecificationsD=24 mmC=10 mmC2=28 mmR=5 mmOL=68 mmShan... read on
Creates a corner bead with a step.By making a second pass at 90 degrees a full corner bead can be cut.Two flutes give a clean finish to cut edges.SpecificationsD=28 mmD2=25.7 mmB=1... read on
Creates a corner bead with a step.By making a second pass at 90 degrees a full corner bead can be cut.Two flutes give a clean finish to cut edges.SpecificationsD=28 mmD2=25.7 mmB=1... read on
Creates a corner bead with a step.By making a second pass at 90 degrees a full corner bead can be cut.Two flutes give a clean finish to cut edges.SpecificationsD=31.9 mmD2=28.6 mmB... read on
With plunge cut these cutters can be used to cut and mould hand holes in stool seats.SpecificationsD=32 mmC=25 mmC2=45 mmR=15 mmOL=86.2 mmShank Diameter=1/2 inchGeneral Information... read on
Can be used to make single, double or corner beads.SpecificationsD1=22 mmC=19 mmB=16 mmR1=3 mmOL=69.65 mmShank Diameter=1/4 inchesGeneral InformationNett Weight (kg): 44Gross Weigh... read on
This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled.SpecificationsD=22 mmC=16 mmB=16 mmR=10 mmOL=67.... read on
With plunge cut these cutters can be used to cut and mould hand holes in stool seats.SpecificationsD=20 mmC=22 mmC2= 35 mmR=18 mmOL=75 mmShank Diameter=1/2 inchGeneral InformationN... read on
