Clarke General Use Tools

Found 204 product(s). Showing product(s) 1 to 204.

• Clarke 100mm Bench Vice (Swivel Base) - CVR100B

  

  A tough general purpose engineering style bench vice of solid cast iron construction with a large square anvil, swivel base, and machined jaws. Firm Grip - Great Value! Jaw ... read on

  1. @21846Available
  2. Clarke
  3. £36.57 (ex VAT)
  4. £43.88 (inc VAT)

  ViewAdd to cart

• Clarke 200mm F Clamp

  

  Model No: CHT354 Part No: 1801354... read on

  1. @20280Available
  2. Clarke
  3. £4.50 (ex VAT)
  4. £5.40 (inc VAT)

  

  ViewAdd to cart

• Clarke CMV140 Multi-Purpose Cast Iron Vice

  

  This ingenious three point bench mounting vice is ideal for mechanics and engineers. Constructed of robust cast iron offering many features including 360° swivel and jaws whi... read on

  1. @43105Available
  2. Clarke
  3. £109.19 (ex VAT)
  4. £131.03 (inc VAT)

  ViewAdd to cart

• Clarke CHT873 36 inch Spreader Clamp - Code 1801873

  

    Can be used as a spreader or compression clamp by a simple head reversal.   Clamp cap: 925mm, Spread cap: 1113mm Dual action spreader or compression clamp by si... read on

  1. @84084Available
  2. Clarke
  3. £10.98 (ex VAT)
  4. £13.18 (inc VAT)

  ViewAdd to cart

• Clarke CDV60C 6 inch Vice

  

  Normally bolted to the work table on a pillar drill, these precision machined, cast iron vices enables items to be held firmly in position whilst being drilled. Improves accura... read on

  1. @21855Available
  2. Clarke
  3. £32.59 (ex VAT)
  4. £39.11 (inc VAT)

  ViewAdd to cart

• Clarke 1000mm F Clamp

  

  Model No: CHT359 Part No: 1801359... read on

  1. @20279Available
  2. Clarke
  3. £12.12 (ex VAT)
  4. £14.54 (inc VAT)

  ViewAdd to cart

• Clarke CM170 Combination Square Set

  

  square, centre, and protractor heads with (12 inch ) stainless steel rule Measuring heads lock onto the rule for precise square, centreing and angular alignment Square head sets... read on

  1. @21919Available
  2. Clarke
  3. £37.87 (ex VAT)
  4. £45.44 (inc VAT)

  ViewAdd to cart

• Clarke CHT724 3 Piece Try Square Set - Code 1801724

  

  A handy three piece try square set, complete with try squares of three differing sizes, all manufactured from durable aluminium. 3 sizes: 150mm, 250mm and 400mm Spirit levels... read on

  1. @84115Available
  2. Clarke
  3. £15.98 (ex VAT)
  4. £19.18 (inc VAT)

  ViewAdd to cart

• Clarke CHT919 15 Piece Colour Coded Screwdriver Bit Set - Code 1801919

  

    This set has been manufactured from durable chrome vanadium for ensured robustness and colour coded for easy identification. This set includes: 3 x Slotted Bits (4, 5 ... read on

  1. @114138Available
  2. Clarke
  3. £8.50 (ex VAT)
  4. £10.20 (inc VAT)

  ViewAdd to cart

• Clarke CV150B 6 inch Bench Vice (Fixed Base)

  

  Clarke all metal bench vice is manufactured from solid cast iron and fitted with a large square anvil, fixed base, and machined jaws too. And, of course, it ensures a firm grip... read on

  1. @21839Available
  2. Clarke
  3. £74.21 (ex VAT)
  4. £89.05 (inc VAT)

  

  ViewAdd to cart

• Clarke CDV30C 3 inch Drill Press Vice

  

  Normally bolted to a pillar drills' work table, this precision machined, cast iron vice enables work pieces to be held firmly in position whilst being drilled. Improves accurac... read on

  1. @21848Available
  2. Clarke
  3. £13.19 (ex VAT)
  4. £15.83 (inc VAT)

  ViewAdd to cart

• Clarke CHT355 300mm F Clamp

  

  Model No: CHT355 Part No: 1801355... read on

  1. @20281Available
  2. Clarke
  3. £6.00 (ex VAT)
  4. £7.20 (inc VAT)

  ViewAdd to cart

• Clarke CHT491 - 5M Tape Measure

  

  A 5 metre / 16ft tape measure for both professional & DIY use with an impact resistant rubber casing for durability, and three position instantaneous stop button. Fully ... read on

  1. @22161Available
  2. Clarke
  3. £6.62 (ex VAT)
  4. £7.94 (inc VAT)

  ViewAdd to cart

• Clarke CHT923 44 Piece Screwdriver & Bit Set - 1801923

  

  A comprehensive screwdriver & bit set made from hardened chrome vanadium steel, tempered for greater strength and durability. Ergonomically designed soft grip handles for inc... read on

  1. @91845Available
  2. Clarke
  3. £23.96 (ex VAT)
  4. £28.75 (inc VAT)

  ViewAdd to cart

• Clarke PRO237 1/2” Drive Digital Electronic Torque Wrench

  

    High accuracy digital torque wrench great for tightening bolts and nuts to a desired torque value. Reversible ratchet head allows for both forward and reverse torque re... read on

  1. @69081Available
  2. Clarke
  3. £89.97 (ex VAT)
  4. £107.96 (inc VAT)

  ViewAdd to cart

• Clarke 500mm F Clamp

  

  Model No: CHT357 Part No: 1801357... read on

  1. @20283Available
  2. Clarke
  3. £9.99 (ex VAT)
  4. £11.99 (inc VAT)

  ViewAdd to cart

• Clarke PRO236 3/8” Drive Digital Electronic Torque Wrench

  

  High accuracy digital torque wrench great for tightening bolts and nuts to a desired torque value. Reversible ratchet head allows for both forward and reverse torque readings. La... read on

  1. @69080Available
  2. Clarke
  3. £90.77 (ex VAT)
  4. £108.92 (inc VAT)

  ViewAdd to cart

• Clarke CHT708 25” Guide Clamp - Code 1801708

  

  Simple to use, clamp onto workpiece and guide your power tool to create perfect straight edges and accurate cross cutting, routing etc. Cam lock action with quick lever adjust... read on

  1. @84114Available
  2. Clarke
  3. £16.48 (ex VAT)
  4. £19.78 (inc VAT)

  ViewAdd to cart

• Clarke CCV4C 4 inch (103mm) Cross Vice

  

  A heavy duty 102mm cast iron cross travel vice offering precise control of movement in two horizontal planes, so combining accurate positioning with a secure hold. Jaw width... read on

  1. @21850Available
  2. Clarke
  3. £70.79 (ex VAT)
  4. £84.95 (inc VAT)

  ViewAdd to cart

• Clarke ET129 Magnetic Weld Clamp

  

  A unit comprising 2 powerful linked magnets and used for holding separate pieces of ferrous material in position at varying angles prior to and during welding. Model No: ET1... read on

  1. @20498Available
  2. Clarke
  3. £14.34 (ex VAT)
  4. £17.21 (inc VAT)

  ViewAdd to cart

• Clarke CHT924 58 Piece Screwdriver & Bit Set - 1801924

  

  Comprehensive selection of screwdrivers & bits made from hardened chrome vanadium steel, tempered for greater strength and durability. Ergonomically designed soft grip handle... read on

  1. @91846Available
  2. Clarke
  3. £23.96 (ex VAT)
  4. £28.75 (inc VAT)

  ViewAdd to cart

• Clarke CHT493 - 10M Tape Measure

  

  A 10 metre / 32ft tape measure for both professional & DIY use with an impact resistant rubber casing for durability, and three position instantaneous stop button. Fully... read on

  1. @22163Available
  2. Clarke
  3. £9.00 (ex VAT)
  4. £10.80 (inc VAT)

  ViewAdd to cart

• Clarke CHT684 50� Clamp Guide

  

  Simple to use, clamp onto workpiece and guide your power tool to create perfect straight edges and accurate cross cutting, routing etc. Cam lock action with quick lever adjust... read on

  1. @43178Available
  2. Clarke
  3. £22.98 (ex VAT)
  4. £27.58 (inc VAT)

  ViewAdd to cart

• Clarke CHT740 Folding Utility Knife

  

  A handy folding utility knife including 5 spare blades, ideal for hobby and trade use. Featuring strong steel blades for fast accurate cuts and a lightweight aluminium handle for ... read on

  1. @69210Available
  2. Clarke
  3. £8.58 (ex VAT)
  4. £10.30 (inc VAT)

  ViewAdd to cart

• Clarke CHT137 72 inch Sash Clamp Set

  

  Robust sash clamp set, heavy 'T'-bar style construction and ideal for both the domestic and trade user. Supplied in sets of two, this 72 inch cramp set represents exceptional value... read on

  1. @20286Available
  2. Clarke
  3. £47.49 (ex VAT)
  4. £56.99 (inc VAT)

  ViewAdd to cart

• Clarke CV125B 5 inch Bench Vice (Fixed Base)

  

  A tough general purpose bench vice, manufactured from solid cast iron and fitted with a large square anvil, fixed base, and machined jaws. And, of course, it ensures a firm gri... read on

  1. @21838Available
  2. Clarke
  3. £48.99 (ex VAT)
  4. £58.79 (inc VAT)

  ViewAdd to cart

• Clarke CVR125B - 125mm Workshop Vice Swivel Base

  

  A robust cast iron vice with swivel base, ideal for the enthusiastic DIY user. 125mm jaw width 115mm jaw opening 70mm jaw depth Swivel base Weight 14.0kgs Model No:... read on

  1. @21847Available
  2. Clarke
  3. £57.67 (ex VAT)
  4. £69.20 (inc VAT)

  ViewAdd to cart

• Clarke CHT278 - 24oz Ball Pein Hammer

  

  Model No: CHT278Part No: 1801278... read on

  1. @21955Available
  2. Clarke
  3. £9.81 (ex VAT)
  4. £11.77 (inc VAT)

  ViewAdd to cart

• Clarke CHT812 14 Piece Cushion Grip Combination Spanner Set: 6-32mm - Code 1801812

  

    14 Piece cushion grip combination spanner set: 6-32mm - Cushion grip for comfortable use and mirror polished finish that prevents oil and grease adhering to the surface. ... read on

  1. @76814Available
  2. Clarke
  3. £39.98 (ex VAT)
  4. £47.98 (inc VAT)

  ViewAdd to cart

• Clarke CHT918 32 Piece Colour Coded Screwdriver Bit Set - Code 1801918

  

    This set has been manufactured from durable chrome vanadium for ensured robustness and colour coded for easy identification. This set includes: 4 x Slotted Bits (3, 4,... read on

  1. @114137Available
  2. Clarke
  3. £11.50 (ex VAT)
  4. £13.80 (inc VAT)

  ViewAdd to cart

• Clarke CHT117 Magnetic Weld Clamp Set

  

  A pair of powerful triangular magnets designed to hold separate pieces of ferrous material in position at fixed angles of either 45 degrees or 90 degrees prior to and during we... read on

  1. @20488Available
  2. Clarke
  3. £15.97 (ex VAT)
  4. £19.16 (inc VAT)

  ViewAdd to cart

• Clarke CV4RB 100mm Workshop Vice (Fixed Base, Red)

  

  Clarkes solid cast iron vice is ideal for home craftsmen, DIY enthusiasts and general home workshop use. It's solid cast iron construction, including cast iron anvil, and fixed... read on

  1. @21841Available
  2. Clarke
  3. £29.91 (ex VAT)
  4. £35.89 (inc VAT)

  

  ViewAdd to cart

• Clarke CVR150B - 150mm Workshop Vice Swivel Base

  

  A tough, general purpose engineering bench vice, robustly constructed from solid cast iron, that has a large square anvil, swivel base, and machined jaws. It provides firm grip... read on

  1. @21853No stock
  2. Clarke
  3. £78.46 (ex VAT)
  4. £94.15 (inc VAT)

  View

• Clarke CV200BH Fixed Base Bench Vice

  

  A heavy duty general purpose bench vice. Fitted with an anvil, fixed base and machined jaws. Ensures a firm grip to make a number of cutting, shaping, forming jobs much easier. ... read on

  1. @43061Available
  2. Clarke
  3. £122.69 (ex VAT)
  4. £147.23 (inc VAT)

  ViewAdd to cart

• Clarke CHT856 24 inch Spreader Clamp

  

  This Clarke spreader clamp can be used as a spreader or compression clamp by a simple head reversal. Clamp cap: 620mm, Spread cap: 805mm Dual action spreader or compress... read on

  1. @73439Available
  2. Clarke
  3. £9.99 (ex VAT)
  4. £11.99 (inc VAT)

  ViewAdd to cart

• Clarke CSVR200 - 200mm Steel Vice

  

  A substantial heavy duty vice with swivel base for engineering and general workshop duty. Jaw width 200mm Jaw opening 200mm Jaw Depth 100mm Steel vice - Malleable iron ba... read on

  1. @21861Available
  2. Clarke
  3. £92.99 (ex VAT)
  4. £111.59 (inc VAT)

  ViewAdd to cart

• Clarke CHT136 36 inch T-Bar Sash Clamp Set

  

  Robust sash clamp set, heavy 'T'-bar style construction and ideal for both the domestic and trade user. Supplied in sets of two, this 36 inch cramp set represents exceptional value... read on

  1. @20285Available
  2. Clarke
  3. £32.57 (ex VAT)
  4. £39.08 (inc VAT)

  ViewAdd to cart

• Clarke CDV40C 4 inch Drill Press Vice

  

  Normally bolted to the work table on a pillar drill, these precision machined, cast iron vices enables items to be held firmly in position whilst being drilled. Improves accura... read on

  1. @21849Available
  2. Clarke
  3. £18.59 (ex VAT)
  4. £22.31 (inc VAT)

  ViewAdd to cart

• Clarke CPB7CH - 7pc Panel Beating Kit

  

  This 7pc panel beating set with hickory shafts includes: 3 genuine hickory shafted hammers with drop forged heads 4 polished drop forged steel dollies Supplied in tough moul... read on

  1. @57643Available
  2. Clarke
  3. £38.49 (ex VAT)
  4. £46.19 (inc VAT)

  ViewAdd to cart

• Clarke CHT291 Black Rubber Mallet

  

  Model No: CHT291 Part No: 1801291... read on

  1. @21961Available
  2. Clarke
  3. £4.99 (ex VAT)
  4. £5.99 (inc VAT)

  

  ViewAdd to cart

• Clarke CHT219 36 inch Bolt Cutter

  

  A heavy duty cutter with tubular handles and forged steel blades hardened and tempered with a matt black finish. Five point compound leverage enables easy cutting through rod,... read on

  1. @21981Available
  2. Clarke
  3. £31.00 (ex VAT)
  4. £37.20 (inc VAT)

  ViewAdd to cart

• Clarke CHT106 11-Pce AF Spanner Set

  

  Manufactured from durable chrome vanadium steel, this 11 piece combination spanner set with polished ends covers most of the common imperial sizes 11 AF sizes 3/8 inch , 7/16 inch , ?... read on

  1. @22671Available
  2. Clarke
  3. £18.97 (ex VAT)
  4. £22.76 (inc VAT)

  ViewAdd to cart

• Clarke CHT611 12pc Polished Elliptical Ring Spanner Set - Metric

  

  Set of 12 metric eliptical ring spanners. Forged in chrome vanadium steel with polished mirror finish. Spanner shafts have elliptical profile for comfortable grip. &nbs... read on

  1. @69159Available
  2. Clarke
  3. £29.87 (ex VAT)
  4. £35.84 (inc VAT)

  ViewAdd to cart

• Clarke CRJ100 Soft Vice Jaw Inserts 100mm

  

  Aluminium vice jaw inserts with soft rubber faces to prevent marking of workpieces. Each jaw has 4 magnets to firmly attach to steel vices ... read on

  1. @75405Available
  2. Clarke
  3. £8.89 (ex VAT)
  4. £10.67 (inc VAT)

  ViewAdd to cart

• Clarke CAT82B Air Powered Caulking Gun

  

  This air powered caulking gun is ideal for a wide range of workshop jobs and accepts standard size C3 (215x50mm) cartridges for added convenience. Operating pressure ran... read on

  1. @21054Available
  2. Clarke
  3. £18.71 (ex VAT)
  4. £22.45 (inc VAT)

  ViewAdd to cart

• Clarke CDV50C 5 inch Drill Press Vice

  

  Normally bolted to the work table on a pillar drill, these precision machined, cast iron vices enables items to be held firmly in position whilst being drilled. Improves accura... read on

  1. @21852Available
  2. Clarke
  3. £28.39 (ex VAT)
  4. £34.07 (inc VAT)

  ViewAdd to cart

• Clarke CMV100 Multi-Purpose Cast Iron Vice - Code 6501967

  

    This vice is ideal for both mechanics and engineers and benefits from a cast iron body for added reliability, and a swivel base with rotating jaws with a calibrated scale... read on

  1. @84144Available
  2. Clarke
  3. £76.97 (ex VAT)
  4. £92.36 (inc VAT)

  ViewAdd to cart

• Clarke WV7 - 7� (180mm) Woodworking Vice

  

  A 7 inch cast iron wood workers vice with adjustable front dog for use with large work pieces, and a smooth action tread screw. Slim, strong and durable cast iron body Under be... read on

  1. @20298Available
  2. Clarke
  3. £46.99 (ex VAT)
  4. £56.39 (inc VAT)

  ViewAdd to cart

• Clarke CHT277 - 16oz Ball Pein Hammer

  

  Model No: CHT277Part No: 1801277... read on

  1. @20303Available
  2. Clarke
  3. £7.85 (ex VAT)
  4. £9.42 (inc VAT)

  ViewAdd to cart

• Clarke CHT292 Black Rubber Mallet

  

  Model No: CHT292 Part No: 1801292... read on

  1. @21962Available
  2. Clarke
  3. £6.00 (ex VAT)
  4. £7.20 (inc VAT)

  ViewAdd to cart

• Clarke PRO122 - 10-Pce Pro Screwdriver Set

  

  This professional set has a selection of the mostly commonly used sizes of slotted and Philips drive screwdrivers. Each one has a hexagon drive, located above the handle, to of... read on

  1. @22098Available
  2. Clarke
  3. £24.82 (ex VAT)
  4. £29.78 (inc VAT)

  ViewAdd to cart

• Clarke CHT104 3-Pce Adjustable Wrench Set

  

  Used individually or together these 3 wrenches are always useful for general maintenance and repairs and will adjust to a wide range of imperial/metric sizes. Manufactured fro... read on

  1. @22119Available
  2. Clarke
  3. £11.79 (ex VAT)
  4. £14.15 (inc VAT)

  ViewAdd to cart

• Clarke CVR125BL Swivel Base Bench Vice

  

  A light duty general purpose bench vice. Fitted with an anvil, swivel base and machined jaws. Ensures a firm grip to make a number of cutting, shaping, forming jobs much easier. ... read on

  1. @43058Available
  2. Clarke
  3. £29.22 (ex VAT)
  4. £35.06 (inc VAT)

  ViewAdd to cart

• Clarke CA24 24lb Anvil

  

  Ideal for metal forming, riveting and general metalwork. Cast Iron build Flat working surface (L170 x W90mm) 4 base lugs for permanent fixing Weight 11.8kg ... read on

  1. @43119Available
  2. Clarke
  3. £41.32 (ex VAT)
  4. £49.58 (inc VAT)

  ViewAdd to cart

• Clarke CHT853 6 inch Spreader Clamp

  

  This Clarke spreader clamp can be used as a spreader or compression clamp by a simple head reversal. Clamp cap: 155mm, Spread cap: 345mm Dual action spreader or compress... read on

  1. @73437Available
  2. Clarke
  3. £6.99 (ex VAT)
  4. £8.39 (inc VAT)

  ViewAdd to cart

• Clarke CHT804 25 Piece Combination Spanner Set – Metric - Code 1801804

  

    25 piece Combination spanner set - metric   Drop forged mirror finished chrome vanadium steel Open end and 12 point ring spanners Heat treated and precision ma... read on

  1. @76807Available
  2. Clarke
  3. £64.98 (ex VAT)
  4. £77.98 (inc VAT)

  ViewAdd to cart

• Clarke PRO117 - 12 inch Adjustable Wrench

  

  An essential item in any professional tool kit. This adjustable wrench comes with a Lifetime Guarantee. Manufactured from high grade chrome vanadium steel Smooth adjusting... read on

  1. @22123Available
  2. Clarke
  3. £15.71 (ex VAT)
  4. £18.85 (inc VAT)

  ViewAdd to cart

• Clarke 3/8 inch Drive Reversible Torque Wrench - CHT204

  

  Correct torque settings are essential on many components.  To ensure that nuts are tightened evenly and in accordance with manufacturers specifications, this wrench has... read on

  1. @22698Available
  2. Clarke
  3. £21.50 (ex VAT)
  4. £25.80 (inc VAT)

  ViewAdd to cart

• Clarke CDV-100QR Quick Release Drill Press Vice

  

    A versatile drill press vice. Quick action release allows jaws to be opened quickly. Built from tough die-cast aluminium. Supplied with a G clamp mount and extended jaw... read on

  1. @69465Available
  2. Clarke
  3. £18.37 (ex VAT)
  4. £22.04 (inc VAT)

  ViewAdd to cart

• Clarke CRJ125 Soft Vice Jaw Inserts 125mm

  

  Aluminium vice jaw inserts with soft rubber faces to prevent marking of workpieces. Each jaw has 4 magnets to firmly attach to steel vices ... read on

  1. @75406Available
  2. Clarke
  3. £9.92 (ex VAT)
  4. £11.90 (inc VAT)

  ViewAdd to cart

• Clarke 10lb Sledge Hammer (Fibreglass Handle)

  

  Model No: CHT511 Part No: 1801511... read on

  1. @21708Available
  2. Clarke
  3. £32.26 (ex VAT)
  4. £38.71 (inc VAT)

  ViewAdd to cart

• Clarke CVC9 9 inch Table Vice

  

  The easy way to secure a workpiece to the drill press table. Ideal for repetitive, quick change operations. Overall length 229 mm Clamping jaws screw adjustable up to 95 mm... read on

  1. @21870Available
  2. Clarke
  3. £19.07 (ex VAT)
  4. £22.88 (inc VAT)

  ViewAdd to cart

• Clarke PRO64 Internal Circlip Pliers

  

  Professional quality tools at a great price, these circlip pliers are an invaluable addition to your tool kit. Hardened and tempered chrome vanadium steel Spring action han... read on

  1. @22004Available
  2. Clarke
  3. £9.94 (ex VAT)
  4. £11.93 (inc VAT)

  ViewAdd to cart

• Clarke CPB7C 7pce Panel Beating Set

  

  Set designed to aid reshaping metal Includes three fibreglass-handled hammers with drop-forged heads Features four drop-forged dollies Supplied in moulded case Model ... read on

  1. @22068Available
  2. Clarke
  3. £38.47 (ex VAT)
  4. £46.16 (inc VAT)

  ViewAdd to cart

• Clarke CHT855 18 inch Spreader Clamp - Code 1801855

  

    This spreader clamp can be used as a spreader or compression clamp by a simple head reversal.   Clamp cap: 465mm, Spread cap: 650mm Dual action spreader or comp... read on

  1. @76846Available
  2. Clarke
  3. £8.90 (ex VAT)
  4. £10.68 (inc VAT)

  ViewAdd to cart

• Clarke 400mm F Clamp

  

  Model No: CHT356Part No: 1801356... read on

  1. @20282Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke CV75B - 75mm Workshop Vice (Fixed Base)

  

  A robust, cast iron 'Blue Line' vice for the DIY workshop. 75mm jaw width 75mm jaw opening 46mm jaw depth Robust fixed base Weight 4.5kg Model No: CV75B Part No: 6... read on

  1. @21843Available
  2. Clarke
  3. £27.19 (ex VAT)
  4. £32.63 (inc VAT)

  ViewAdd to cart

• Clarke CHT100 25-Pce AF/Metric HEX key set

  

  A good selection of popular sized strong steel hex keys of varying lengths all with a black finish. Sizes (long reach) 1/16 inch - 3/8 inch Sizes (standard length) 1.5 - 10mm ... read on

  1. @22080Available
  2. Clarke
  3. £6.50 (ex VAT)
  4. £7.80 (inc VAT)

  ViewAdd to cart

• Clarke PRO138 - 29pce Extra Long Hex & Torx Key Set

  

  One set with three separate holders for each Hex Key type - Torx key, metric hex key & imperial hex key A tough, useful and versatile Torx, metric & imperial he... read on

  1. @22099Available
  2. Clarke
  3. £23.97 (ex VAT)
  4. £28.76 (inc VAT)

  ViewAdd to cart

• Clarke CVR150BL Swivel Base Bench Vice

  

  A light duty general purpose bench vice. Fitted with an anvil, swivel base and machined jaws. Ensures a firm grip to make a number of cutting, shaping, forming jobs much easier. ... read on

  1. @43057No stock
  2. Clarke
  3. £54.89 (ex VAT)
  4. £65.87 (inc VAT)

  View

• Clarke CHT917 56 Piece Colour Coded Screwdriver Bit Set - Code 1801917

  

    This set has been manufactured from durable chrome vanadium for ensured robustness and colour coded for easy identification. This set includes: 7 x Slotted Bits (2x 4, 2... read on

  1. @114136Available
  2. Clarke
  3. £15.00 (ex VAT)
  4. £18.00 (inc VAT)

  ViewAdd to cart

• Clarke CSVR150 - 150mm Steel Vice

  

  A substantial heavy duty vice with swivel base for engineering and general workshop duty. Jaw width 150mm Jaw opening 150mm Jaw Depth 90mm Steel vice - Malleable iron bas... read on

  1. @21860Available
  2. Clarke
  3. £49.49 (ex VAT)
  4. £59.39 (inc VAT)

  ViewAdd to cart

• Clarke CHT133 - 18 inch Bolt Cutter

  

  These heavy duty bolt croppers offer sufficient power without being unwieldy. 18 inch Heavy duty bolt cutter, tubular handle with grip Compound leverage for ease of operation ... read on

  1. @21974Available
  2. Clarke
  3. £12.01 (ex VAT)
  4. £14.41 (inc VAT)

  ViewAdd to cart

• Clarke CV125BL Fixed Base Bench Vice

  

  A light duty general purpose bench vice. Fitted with an anvil, fixed base and machined jaws. Ensures a firm grip to make a number of cutting, shaping, forming jobs much easier. ... read on

  1. @43056Available
  2. Clarke
  3. £30.79 (ex VAT)
  4. £36.95 (inc VAT)

  ViewAdd to cart

• Clarke CV150BL Fixed Base Bench Vice

  

  A light duty general purpose bench vice. Fitted with an anvil, fixed base and machined jaws. Ensures a firm grip to make a number of cutting, shaping, forming jobs much easier. ... read on

  1. @43060Available
  2. Clarke
  3. £47.37 (ex VAT)
  4. £56.84 (inc VAT)

  ViewAdd to cart

• Clarke CHT674 1/4 inch Drive Torque Wrench

  

  Ideal for low torque applications, manufactured from forged steel. �� drive 5 � 25Nm Supplied in a case ... read on

  1. @43132Available
  2. Clarke
  3. £28.31 (ex VAT)
  4. £33.97 (inc VAT)

  ViewAdd to cart

• Clarke CHT614 406mm (16 inch ) Combination Square

  

  High quality aluminium blade with graduated scale (on both sides). Metric and imperial measurements. Black metal base with brass adjusting screw features built in spirit level an... read on

  1. @45402Available
  2. Clarke
  3. £14.50 (ex VAT)
  4. £17.40 (inc VAT)

  ViewAdd to cart

• Clarke CL CV100B 100mm Workshop Vice (Fixed Base)

  

    A robust home workshop and DIY use cast iron vice with a solid, stable fixed base. Manufactured from solid cast iron, it's solidly constructed with a large square anvil, ... read on

  1. @69464Available
  2. Clarke
  3. £28.39 (ex VAT)
  4. £34.07 (inc VAT)

  ViewAdd to cart

• Clarke CHT243 Oil Filter Chain Wrench

  

  This powerful chain wrench can access many of the more awkward and difficult to reach locations. Its strong grip will persuade even stubborn oil filters to yield to its turning... read on

  1. @20944Available
  2. Clarke
  3. £7.17 (ex VAT)
  4. £8.60 (inc VAT)

  

  ViewAdd to cart

• Clarke CSVR100 - 100mm Steel Vice

  

  A substantial heavy duty vice with swivel base for engineering and general workshop duty. Jaw width 100mm Jaw opening 100mm Jaw Depth 75mm Steel vice - Malleable iron bas... read on

  1. @21859Available
  2. Clarke
  3. £23.27 (ex VAT)
  4. £27.92 (inc VAT)

  ViewAdd to cart

• Clarke 32oz Ball Pein Hammer (Fibreglass Handle)

  

  Model No: CHT509Part No: 1801509... read on

  1. @21950Available
  2. Clarke
  3. £9.92 (ex VAT)
  4. £11.90 (inc VAT)

  ViewAdd to cart

• Clarke PRO97 5-Pce Professional Pliers Set

  

  A varied and useful selection of five professional quality pliers suitable for trade users and others who enjoy using top quality tools. Insulated handle grips for everyday ... read on

  1. @22012Available
  2. Clarke
  3. £19.99 (ex VAT)
  4. £23.99 (inc VAT)

  ViewAdd to cart

• Clarke PRO140 8pce Hex Key Set

  

  A really useful set of the most popular sized metric hex keys. Each key very conveniently folds back into the handle when not being used. Key Sizes - 2, 2.5, 3, 4, 5, 6, 7 & 8... read on

  1. @22101Available
  2. Clarke
  3. £8.29 (ex VAT)
  4. £9.95 (inc VAT)

  ViewAdd to cart

• Clarke PRO54 7-Pce Metric Hex Key Set

  

  A robust long arm ball end metric HEX key set in chrome vanadium steel with a holding clip. Sizes: 2.5, 3, 4, 5, 6, 8, 10mm Model No: PRO54Part No: 1700454... read on

  1. @22115Available
  2. Clarke
  3. £7.50 (ex VAT)
  4. £9.00 (inc VAT)

  ViewAdd to cart

• Clarke CHT647 20 Pce Screwdriver Set

  

  Made from hardened Chrome Vanadium steel for maximum strength & durability. Assorted styles & sizes, including precision screwdrivers. With comfort grip handles and suppl... read on

  1. @38792Available
  2. Clarke
  3. £24.95 (ex VAT)
  4. £29.94 (inc VAT)

  ViewAdd to cart

• Clarke CHT152 6 inch Woodworkers Vice

  

  Clarke 6 inch vice ideal for wood workers and hobbyists alike. Jaw Width - 150mm Jaw Opening - 152mm Jaw Depth - 61mm Tough cast iron construction Machine cut thread for smo... read on

  1. @20288Available
  2. Clarke
  3. £19.91 (ex VAT)
  4. £23.89 (inc VAT)

  ViewAdd to cart

• Clarke CHT282 -16oz Tubular Claw Hammer

  

  Model No: CHT282Part No: 1801282... read on

  1. @20304Available
  2. Clarke
  3. £7.74 (ex VAT)
  4. £9.29 (inc VAT)

  ViewAdd to cart

• Clarke CHT260 Piston Ring Pliers

  

  Specially designed, sprung loaded pliers with tapered holding jaws make the job of fitting & removing piston rings that much easier & safer. Tapered jaws for easy, intact remo... read on

  1. @20950Available
  2. Clarke
  3. £7.47 (ex VAT)
  4. £8.96 (inc VAT)

  ViewAdd to cart

• Clarke CVC6 6 inch Table Vice

  

  The easy way to secure a workpiece to the drill press table. Ideal for repetitive, quick change operations. Overall length 152 mm Clamping jaws screw adjustable up to 38 mm... read on

  1. @21869Available
  2. Clarke
  3. £17.97 (ex VAT)
  4. £21.56 (inc VAT)

  ViewAdd to cart

• Clarke CHT110 3-Pce Plier Set

  

  A handy 3 piece set of pliers covering a wide range of uses, these are essentials for any tool kit. 175mm Linesman Combination pliers 150mm long nose pliers 50mm side cutt... read on

  1. @21968Available
  2. Clarke
  3. £9.39 (ex VAT)
  4. £11.27 (inc VAT)

  ViewAdd to cart

• Clarke CHT134 - 24 inch Bolt Cutter

  

  Large heavy duty bolt cutters, with the power to get you out of a tight spot. 24 inch Heavy duty bolt cutter, tubular handle with grip Compound leverage for ease of operation ... read on

  1. @21975Available
  2. Clarke
  3. £19.81 (ex VAT)
  4. £23.77 (inc VAT)

  ViewAdd to cart

• Clarke PRO102 - 6� inch Long Nose Locking Pliers

  

  Chrome Moly steel locking pliers with extra long jaws for improved access in tight spaces. Adjustable grip jaws with lever release mechanism 6.5 inch overall length Model ... read on

  1. @21990Available
  2. Clarke
  3. £8.27 (ex VAT)
  4. £9.92 (inc VAT)

  ViewAdd to cart

• Clarke PRO108 - 12 inch Water Pump Pliers

  

  Chrome nickel steel water pump pliers with groove joint adjustable head. 12 inch overall length Model No: PRO108 Part No: 1700508... read on

  1. @21996No stock
  2. Clarke
  3. £16.14 (ex VAT)
  4. £19.37 (inc VAT)

  View

• Clarke CHT245 Double Drive Oil Filter Wrench

  

  Another way of removing & refiitting oil filters especially when they're difficult to reach. A tough & wide nylon strap grips tightly as the tensioning bar is turned by... read on

  1. @22044Available
  2. Clarke
  3. £12.00 (ex VAT)
  4. £14.40 (inc VAT)

  ViewAdd to cart

• Clarke CHT 343 34-Pce Gearless Screwdriver Kit

  

  A unique screwdriver plus bits set with easy twist action drive in one direction (comparable to a ratchet but only minimal turning movement is required to operate). No need to a... read on

  1. @22079Available
  2. Clarke
  3. £15.71 (ex VAT)
  4. £18.85 (inc VAT)

  ViewAdd to cart

• Clarke PRO120 - 7pce Magnetic Screwdriver Set

  

  A quality set of magnetic tipped screwdrivers with professional quality, chrome vanadium hexagon shanks, extremely durable, matt black (pakerized) finished blades and precision... read on

  1. @22096Available
  2. Clarke
  3. £28.17 (ex VAT)
  4. £33.80 (inc VAT)

  ViewAdd to cart

• Clarke CHT123 Screw Extractor & Wrench Set

  

  Remove broken, damaged & stubborn screws the easy way with this 7 piece extractor set suitable for a range of sizes from 3 - 19mm. Model No: CHT123Part No: 1800123... read on

  1. @22125Available
  2. Clarke
  3. £14.00 (ex VAT)
  4. £16.80 (inc VAT)

  ViewAdd to cart

• Clarke CHT854 12 inch Spreader Clamp

  

  This Clarke spreader clamp can be used as a spreader or compression clamp by a simple head reversal. Clamp cap: 315mm, Spread cap: 500mm Dual action spreader or compress... read on

  1. @73438Available
  2. Clarke
  3. £7.99 (ex VAT)
  4. £9.59 (inc VAT)

  ViewAdd to cart

• Clarke CRJ200 Soft Vice Jaw Inserts 200mm

  

  Aluminium vice jaw inserts with soft rubber faces to prevent marking of workpieces. Each jaw has 4 magnets to firmly attach to steel vices ... read on

  1. @75407Available
  2. Clarke
  3. £11.93 (ex VAT)
  4. £14.32 (inc VAT)

  ViewAdd to cart

• Clarke CMV125B Multi-Purpose Cast Iron Vice - Code 6501971

  

    This vice is ideal for both mechanics and engineers and benefits from a cast iron body for added reliability, and a swivel base with rotating jaws with a calibrated scale... read on

  1. @84145Available
  2. Clarke
  3. £107.97 (ex VAT)
  4. £129.56 (inc VAT)

  ViewAdd to cart

• Clarke PRO407 44 Piece Hammer Through Screwdriver & Bit Set - 1700813

  

  Comprehensive screwdriver & bit set made from hardened chrome vanadium steel, tempered for greater strength and durability. Ergonomically designed soft grip handles for incre... read on

  1. @91847Available
  2. Clarke
  3. £29.56 (ex VAT)
  4. £35.47 (inc VAT)

  ViewAdd to cart

• Clarke 24oz Ball Pein Hammer (Fibreglass Handle)

  

  Model No: CHT508Part No: 1801508... read on

  1. @20302Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke CHT296 - 20oz One Piece Claw Hammer

  

  Model No: CHT296Part No: 1801296... read on

  1. @20307Available
  2. Clarke
  3. £12.56 (ex VAT)
  4. £15.07 (inc VAT)

  ViewAdd to cart

• Clarke CBV60B 60mm Hobby Swivel Vice

  

  A general purpose swivel vice for the home workshop which will clamp to any worksurface up to 40mm and then turn for best position. Manufactured from solid carbon steel Jaw o... read on

  1. @21830Available
  2. Clarke
  3. £10.17 (ex VAT)
  4. £12.20 (inc VAT)

  ViewAdd to cart

• Clarke CM250 Measuring Set

  

  A perfect starter kit for the engineering enthusiast, including the four most commonly used precision measuring / checking devices used in the workshop. Excellent value for mon... read on

  1. @21927Available
  2. Clarke
  3. £29.98 (ex VAT)
  4. £35.98 (inc VAT)

  ViewAdd to cart

• Clarke ET110 Machinists Steel Square (150mm)

  

  An engineers means to accurately check the right angle. 6 inch blade is hardened, tempered and polished. Both beam and blade are ground for straightness and parallelism. Mod... read on

  1. @21930Available
  2. Clarke
  3. £7.34 (ex VAT)
  4. £8.80 (inc VAT)

  ViewAdd to cart

• Clarke ET135 12 inch Engineers Rule

  

  A standard 300mm Stainless Steel measure for the precision engineer. Manufactured from stainless steel Calibrations etched in imperial and metric. Model No: ET135Part No... read on

  1. @21935Available
  2. Clarke
  3. £7.19 (ex VAT)
  4. £8.63 (inc VAT)

  ViewAdd to cart

• Clarke CHT285 Dead Blow Hammer

  

  Model No: CHT285Part No: 1801285... read on

  1. @21959Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke PRO106 - 8 inch Water Pump Pliers

  

  Superior quality pliers, especially designed for plumbing jobs but so useful for many other service applications where a secure holding grip is required. Manufactured from hig... read on

  1. @21994No stock
  2. Clarke
  3. £9.39 (ex VAT)
  4. £11.27 (inc VAT)

  View

• Clarke CHT515 Quick Change Trimming Knife

  

  Probably the most comfortable and effective trimming knife you're likely to use, featuring a fully retractable blade system with automatic replacement from an internal magazine h... read on

  1. @22033Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke CHT101 ? inch Drive Impact Screwdriver Set

  

  Stubborn screws won't shift? Very often they will using this impact driver. One or two sharp blows with a hammer normally does the trick. Suits most poular types of screw heads. ... read on

  1. @22081Available
  2. Clarke
  3. £12.50 (ex VAT)
  4. £15.00 (inc VAT)

  ViewAdd to cart

• Clarke CHT582 - 3pce Hex & Torx Key Set

  

  A very useful and superbly versatile three piece 21 tool set - all DIY enthusiasts & hobbyists should have one! The complete set includes all popular metric & imperial sized stan... read on

  1. @22089Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke PRO53 7-Pce A/F Hex Key Set

  

  A robust long arm ball end imperial HEX key set in chrome vanadium steel with a holding clip Sizes: 1/8 inch , 5/32 inch , 3/16 inch , 7/32 inch , 1/4 inch , 5/16 inch , 3/8 inch Model No: PRO53Part No: 1... read on

  1. @22114Available
  2. Clarke
  3. £7.50 (ex VAT)
  4. £9.00 (inc VAT)

  ViewAdd to cart

• Clarke PRO58 8-Pce Metric 'T' Handle Hex Key Set

  

  These comfortable T-Handle HEX bits make it easy to apply more torque and are much preferred by professionals and regular users. They come in a neat storage rack with sizes mark... read on

  1. @22116Available
  2. Clarke
  3. £17.00 (ex VAT)
  4. £20.40 (inc VAT)

  ViewAdd to cart

• Clarke PRO115 - 8 inch Adjustable Wrench

  

  An essential item for any professional engineer's tool kit, this 8 inch adjustable wrench comes with a Lifetime Guarantee. Manufactured from high grade chrome vanadium steel Sm... read on

  1. @22122Available
  2. Clarke
  3. £9.41 (ex VAT)
  4. £11.29 (inc VAT)

  ViewAdd to cart

• Clarke CHT492 - 7.5M Tape Measure

  

  A 7.5 metre / 24ft tape measure for both professional & DIY use with an impact resistant rubber casing for durability, and three position instantaneous stop button. Fully grad... read on

  1. @22162Available
  2. Clarke
  3. £7.63 (ex VAT)
  4. £9.16 (inc VAT)

  ViewAdd to cart

• Clarke PRO158 �� Swivel Head Rapid Wrench

  

  A Professional wrench, with a 180º swivel head and rapid ratchet mechanism for working in tight spaces or hard to reach areas. Perfect for automotive or trade use. Rubbe... read on

  1. @22210Available
  2. Clarke
  3. £26.72 (ex VAT)
  4. £32.06 (inc VAT)

  ViewAdd to cart

• Clarke PRO194 Crows Foot Metric Wrench Set 10 Piece

  

  Set of 10 Chrome Vanadium steel jawed, Crow's Foot Wrenches with 3/8" square drive. Suitable for applications where access is limited. Supplied on storage rail. 10 x ... read on

  1. @22682Available
  2. Clarke
  3. £19.91 (ex VAT)
  4. £23.89 (inc VAT)

  ViewAdd to cart

• Clarke PRO20 12-Pce Metric Combi Wrench Set

  

  Using top quality tools always makes a difference and doesn’t have to cost a great deal more either. These fine quality, slim-profiled metric combination spanners are ... read on

  1. @22690Available
  2. Clarke
  3. £34.00 (ex VAT)
  4. £40.80 (inc VAT)

  ViewAdd to cart

• Clarke CHT625 Combintation Try Square

  

  Heavy duty versatile tool for measuring and marking. Made from aluminium with a stainless steel rule. Includes inside & outside try square, mitre square & 180° protract... read on

  1. @45403Available
  2. Clarke
  3. £9.92 (ex VAT)
  4. £11.90 (inc VAT)

  ViewAdd to cart

• Clarke PRO344 9 Piece Colour Coded Extra-Long Ball End Metric Hex Key Set

  

    9 Piece colour coded extra-long ball end metric hex key set.     Manufactured from hardened steel Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm ... read on

  1. @68937Available
  2. Clarke
  3. £14.87 (ex VAT)
  4. £17.84 (inc VAT)

  ViewAdd to cart

• Clarke CHT695 Oil Filter Cap Wrench Set

  

    This 15 piece oil filter wrench set can be used on most vehicles. The cup design sockets reduce the chance of damaging the filters, saving you time, effort and money. &n... read on

  1. @69174Available
  2. Clarke
  3. £37.62 (ex VAT)
  4. £45.14 (inc VAT)

  ViewAdd to cart

• Clarke CCC-75QR Quick Release Corner Clamp

  

  A versatile mitre and drill press corner clamp. Clamps corner joints at 90°. Built from tough die-cast aluminium with quick action twin jaws. Jaw width: 68mm Jaw opening:... read on

  1. @69467Available
  2. Clarke
  3. £16.19 (ex VAT)
  4. £19.43 (inc VAT)

  ViewAdd to cart

• Clarke CHT868 1200mm Aluminium Sash Clamp

  

    This is an easy to use and lightweight, aluminium sash cramp.     Length: 1200mm Max opening: 1120mm ... read on

  1. @75082Available
  2. Clarke
  3. £15.48 (ex VAT)
  4. £18.58 (inc VAT)

  ViewAdd to cart

• Clarke CRJ75 Soft Vice Jaw Inserts 75mm

  

  Aluminium vice jaw inserts with soft rubber faces to prevent marking of workpieces. Each jaw has 4 magnets to firmly attach to steel vices ... read on

  1. @75404Available
  2. Clarke
  3. £8.83 (ex VAT)
  4. £10.60 (inc VAT)

  ViewAdd to cart

• Clarke CHT265 Hand Driven Oil Filter Wrench

  

  Stiff and stubborn oil filters respond to the power of this wrench. With its long drop forged steel handle and strong linked chain, the job of removal is made so much easier. ... read on

  1. @20952Available
  2. Clarke
  3. £12.67 (ex VAT)
  4. £15.20 (inc VAT)

  ViewAdd to cart

• Clarke CDM85 Digital Clamp Multimeter

  

  Ideal for electricians & test engineers. It will perform essential tests and measurements on most electronic items. Ideal for the automotive electrician & test engineers... read on

  1. @21679Available
  2. Clarke
  3. £12.79 (ex VAT)
  4. £15.35 (inc VAT)

  ViewAdd to cart

• Clarke CSV4E 100mm Steel Bench Vice

  

  A robust metal workers & engineers workshop vice with a solid, cast iron base. The vice itself is all steel construction & virtually unbreakable. Jaw width 100mm Ja... read on

  1. @21858Available
  2. Clarke
  3. £19.19 (ex VAT)
  4. £23.03 (inc VAT)

  

  ViewAdd to cart

• Clarke ET109 Machinists Steel Square (100mm)

  

  An engineers means to accurately check the right angle. 4 inch blade is hardened, tempered and polished. Both beam and blade are ground for straightness and parallelism. Mod... read on

  1. @21929Available
  2. Clarke
  3. £7.72 (ex VAT)
  4. £9.26 (inc VAT)

  ViewAdd to cart

• Clarke ET152 Steel Machinist Square (300mm)

  

  Precision made from the best quality steel for operators regularly checking to ensure linear and 90? accuracy 300mm steel blade hardened & tempered Ground for straightness & ... read on

  1. @21937Available
  2. Clarke
  3. £20.00 (ex VAT)
  4. £24.00 (inc VAT)

  ViewAdd to cart

• Clarke ET115 V Block & Clamp Set

  

  An identical pair of 'V' blocks for precision engineering applications, each supplied with a steel screw clamp. Manufactured from tool steel, hardened and ground to a high degr... read on

  1. @21945Available
  2. Clarke
  3. £36.71 (ex VAT)
  4. £44.05 (inc VAT)

  

  ViewAdd to cart

• Clarke 16oz Claw Hammer (Fibreglass Handle)

  

  Model No: CHT505Part No: 1801505... read on

  1. @21948Available
  2. Clarke
  3. £8.82 (ex VAT)
  4. £10.58 (inc VAT)

  ViewAdd to cart

• Clarke CHT276 - 12oz Ball Pein Hammer

  

  Model No: CHT276Part No: 1801276... read on

  1. @21954Available
  2. Clarke
  3. £8.03 (ex VAT)
  4. £9.64 (inc VAT)

  ViewAdd to cart

• Clarke CHT279 - 32oz Ball Pein Hammer

  

  Model No: CHT279Part No: 1801279... read on

  1. @21956Available
  2. Clarke
  3. £10.22 (ex VAT)
  4. £12.26 (inc VAT)

  ViewAdd to cart

• Clarke CHT281 Club Hammer

  

  Model No: CHT281Part No: 1801281... read on

  1. @21958Available
  2. Clarke
  3. £10.77 (ex VAT)
  4. £12.92 (inc VAT)

  ViewAdd to cart

• Clarke CHT111 6-Pce Mini Plier Set

  

  Ideal for those delicate and awkward jobs, this 6 piece mini pliers set covers a huge range of uses. Each tool features a return spring, forged hardened jaws and soft handle... read on

  1. @21969Available
  2. Clarke
  3. £10.47 (ex VAT)
  4. £12.56 (inc VAT)

  ViewAdd to cart

• Clarke CHT116 3-Pce Lock Grip Pliers Set

  

  Always useful in difficult situations where conventional tools may be unable to provide a strong enough hold. The serrated oval jaws are adjusted to provide an exceptionally stro... read on

  1. @21972Available
  2. Clarke
  3. £10.77 (ex VAT)
  4. £12.92 (inc VAT)

  ViewAdd to cart

• Clarke CHT352 3-Pce Lock Grip Plier Set

  

  A set of three lock grip pliers always useful for general maintenance and repairs especially on worn or stubborn fittings which otherwise are difficult to shift. Handy for bui... read on

  1. @21985Available
  2. Clarke
  3. £10.47 (ex VAT)
  4. £12.56 (inc VAT)

  ViewAdd to cart

• Clarke PRO103 - 9 inch Long Nose Locking Pliers

  

  Chrome Moly steel steel locking long nose pliers with extra long jaws for access in tight spaces. Afjustable grip jaws with a lever release mechanism 9 inch overall length M... read on

  1. @21991Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke PRO109 - 6 inch Long Nose Pliers

  

  Chrome nickel steel long nosed pliers with precision milled tapered jaws and extra thick cushioned handle grips for improved comfort and power delivery. 6 inch overall length ... read on

  1. @21997Available
  2. Clarke
  3. £8.27 (ex VAT)
  4. £9.92 (inc VAT)

  ViewAdd to cart

• Clarke PRO111 - Diagonal Side Cutters

  

  Real cutting edge performance. Top quality professional pliers with a Lifetime Guarantee. Feel the difference. Manufactured from high grade chrome nickel steel Specially ha... read on

  1. @21999Available
  2. Clarke
  3. £8.27 (ex VAT)
  4. £9.92 (inc VAT)

  ViewAdd to cart

• Clarke PRO112 - Diagonal Side Cutters

  

  Real cutting edge performance. Top quality professional pliers with a Lifetime Guarantee. Feel the difference. Manufactured from high grade chrome nickel steel Specially ha... read on

  1. @22000Available
  2. Clarke
  3. £8.82 (ex VAT)
  4. £10.58 (inc VAT)

  ViewAdd to cart

• Clarke PRO63 External Circlip Pliers

  

  Professional quality external circlip pliers manufactured from tough chrome vanadium steel tempered and hardened for long term wear resistance. Circlip range 10 to 40mm Sprin... read on

  1. @22003Available
  2. Clarke
  3. £9.94 (ex VAT)
  4. £11.93 (inc VAT)

  ViewAdd to cart

• Clarke PRO65 Bent Nose External Circlip Pliers

  

  Professional quality tools at a great price, these circlip pliers are an invaluable addition to your tool kit. Hardened and tempered chrome vanadium steel Spring action han... read on

  1. @22005Available
  2. Clarke
  3. £11.94 (ex VAT)
  4. £14.33 (inc VAT)

  ViewAdd to cart

• Clarke 52 Piece Knife Set

  

  A comprehensive knife kit for the aspiring craft or model maker containing virtually everything needed to get started. Suits a whole range of material - wood, cork, leather, r... read on

  1. @22028Available
  2. Clarke
  3. £18.22 (ex VAT)
  4. £21.86 (inc VAT)

  ViewAdd to cart

• Clarke CHT498 ? inch Drive Impact Screwdriver Set

  

  Helps overcome the difficulty and frustration of removing corroded or overtightened screws. Applied hammer action makes easy work of releasing seized up fixings. Can also be re... read on

  1. @22087Available
  2. Clarke
  3. £15.50 (ex VAT)
  4. £18.60 (inc VAT)

  ViewAdd to cart

• Clarke PRO142 8pce Hex Key Set

  

  A set of eight 'pro' quality, ball ended hex keys that conveniently fold into the handle for nice & compact storage. Key sizes - 2, 2.5, 3, 4, 5, 6, 7 & 8mm dia. Ball ended k... read on

  1. @22103Available
  2. Clarke
  3. £8.82 (ex VAT)
  4. £10.58 (inc VAT)

  ViewAdd to cart

• Clarke PRO169 Adjustable Shaft Ratchet Screwdriver set 7pc

  

  Adjustable length ratchet screwdriver with bits, bit storage and magnetic bit holder. Shaft adjusts from 35 to 175mm with storage in shaft locking ring for 6 bits. Set c... read on

  1. @22107Available
  2. Clarke
  3. £13.47 (ex VAT)
  4. £16.16 (inc VAT)

  ViewAdd to cart

• Clarke PRO119 - 5pce Pliers Set

  

  Super quality tools for trade and professional use which carry a Lifetime guarantee. All regularly used items for building, installation and maintenance work. Comfortable to ho... read on

  1. @22124No stock
  2. Clarke
  3. £38.62 (ex VAT)
  4. £46.34 (inc VAT)

  View

• Clarke CHT533 45-Pce 'Stubby' Wrench Set

  

  A high torque ratchet screwdriver & wrench set with a comprehensive range of useful sockets & bits - ideal for numerous DIY jobs. Its a particularly good choice of tool for acces... read on

  1. @22181Available
  2. Clarke
  3. £27.26 (ex VAT)
  4. £32.71 (inc VAT)

  ViewAdd to cart

• Clarke PRO159 3/8? Swivel Head Rapid Wrench (292mm Long)

  

  A Professional wrench, with a 180º swivel head and rapid ratchet mechanism for working in tight spaces or hard to reach areas. Perfect for automotive or trade use. Rubber gr... read on

  1. @22211Available
  2. Clarke
  3. £20.00 (ex VAT)
  4. £24.00 (inc VAT)

  ViewAdd to cart

• Clarke CHT105 24-Pce AF/Metric Spanner Set

  

  Manufactured from durable chrome vanadium steel, this 24 piece combination spanner set with polished ends covers most common metric and imperial sizes 9 AF sizes ? inch , 3/8 inch , 7/1... read on

  1. @22670Available
  2. Clarke
  3. £31.46 (ex VAT)
  4. £37.75 (inc VAT)

  ViewAdd to cart

• Clarke PRO71 3-Pce Metric Flare Nut Wrench Set

  

  Flare type jaws to match 6 popular sizes of metric compression nuts. Superbly manufactured from chrome vanadium steel, hardened, tempered and finished in a high polish deep ch... read on

  1. @22694Available
  2. Clarke
  3. £14.57 (ex VAT)
  4. £17.48 (inc VAT)

  ViewAdd to cart

• Clarke PRO195 Crows Foot Imperial Wrench Set 8 Piece

  

  Set of 8 Chrome Vanadium steel jawed, Crow's Foot Wrenches with 3/8" square drive. Suitable for applications where access is limited. Supplies on storage rail. 8... read on

  1. @22700Available
  2. Clarke
  3. £16.76 (ex VAT)
  4. £20.11 (inc VAT)

  ViewAdd to cart

• Clarke CHT636 12pc Combination Spanner Set - Metric

  

  Set of 12 Metric Combination Spanners. Forged in chrome vanadium steel with polished head. Ring end of spanner is offset at 15° Manufactured to DIN3113 specification. 12 ... read on

  1. @43086Available
  2. Clarke
  3. £15.69 (ex VAT)
  4. £18.83 (inc VAT)

  ViewAdd to cart

• Clarke CHT719 - 1/2 inch & 3/8 inch Oil Filter Wrench

  

  The CHT719 is a simple to use two way, three jaw oil filter wrench manufactured from durable carbon steel and is made specifically to be used with oil filters ranging from 65-120mm... read on

  1. @69192Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke CAT138 X-Pro - Professional 190mm Air Hammer

  

  Professional Long nose 190mm Air Hammer - This robust air hammer is supplied complete with pointed, flat, oval ended, panel cutting and v-groove chisels. For sheet metal cutting a... read on

  1. @69333Available
  2. Clarke
  3. £24.77 (ex VAT)
  4. £29.72 (inc VAT)

  ViewAdd to cart

• Clarke CAT139 X-Pro - Professional 150mm Air Hammer

  

    Professional short nose 150mm Air Hammer. This robust air hammer is supplied complete with pointed, flat, panel cutting and v-groove chisels. For sheet metal cutting an... read on

  1. @69334Available
  2. Clarke
  3. £19.97 (ex VAT)
  4. £23.96 (inc VAT)

  ViewAdd to cart

• Clarke VBV-70 Vacuum Base Vice

  

  Tough die-cast aluminium built vice with a powerful suction base with locking handle for bench mounting. 360° swivel head allows for various positions. Supplied with soft r... read on

  1. @69466Available
  2. Clarke
  3. £15.59 (ex VAT)
  4. £18.71 (inc VAT)

  

  ViewAdd to cart

• Clarke CHT954 9 Piece Hex Key Set - Code 1801954

  

  The Clarke 9 piece hex key set is ideal for those hard to reach areas. This is thanks to the rounded ball end design which aids angled access.The hex keys are colour coded for quic... read on

  1. @135574No stock
  2. Clarke
  3. £6.71 (ex VAT)
  4. £8.05 (inc VAT)

  View

• Clarke CHT659 Long Screwdriver Set (TS & Star)

  

  Screwdriver set has double ended interchangeable blades. One end has standard tamperproof Star drives while the other has five sided TS type ends. Dual sizing and extra long blad... read on

  1. @38793Available
  2. Clarke
  3. £19.50 (ex VAT)
  4. £23.40 (inc VAT)

  ViewAdd to cart

• Clarke 16oz Ball Pein Hammer (Fibreglass Handle)

  

  Model No: CHT507Part No: 1801507... read on

  1. @20301Available
  2. Clarke
  3. £8.27 (ex VAT)
  4. £9.92 (inc VAT)

  ViewAdd to cart

• Clarke CHT295 - 16oz One Piece Claw Hammer

  

  Model No: CHT295Part No: 1801295... read on

  1. @20306Available
  2. Clarke
  3. £11.57 (ex VAT)
  4. £13.88 (inc VAT)

  ViewAdd to cart

• Clarke ET111 Machinists Steel Sqare (200mm)

  

  An engineers means to accurately check the right angle. 8 inch blade is hardened, tempered and polished. Both beam & blade are ground to ensure they are both straight & parallel.... read on

  1. @21931Available
  2. Clarke
  3. £11.02 (ex VAT)
  4. £13.22 (inc VAT)

  ViewAdd to cart

• Clarke ET128 Depth Gauge with Protractor

  

  A Stainless Steel measure with etched graduations for the precision engineer to determine depths up to 6 inch (150mm) and angles through 180 degrees. Dual calibration - inches/mm ... read on

  1. @21932Available
  2. Clarke
  3. £11.04 (ex VAT)
  4. £13.25 (inc VAT)

  ViewAdd to cart

• Clarke ET134 6 inch Pocket Rule

  

  A slim 150mm Stainless Steel measure with clip designed to slip easily into the engineers pocket. Manufactured from stainless steel Calibrations etched in imperial and metric... read on

  1. @21934Available
  2. Clarke
  3. £6.20 (ex VAT)
  4. £7.44 (inc VAT)

  ViewAdd to cart

• Clarke ET151 Steel Machinist Square (250mm)

  

  Precision made from the best quality steel for operators regularly checking to ensure linear and 90? accuracy 250mm steel blade hardened & tempered Ground for straightness & ... read on

  1. @21936Available
  2. Clarke
  3. £17.50 (ex VAT)
  4. £21.00 (inc VAT)

  ViewAdd to cart

• Clarke ET156 - 3 inch Feeler Gauge

  

  Precision made, dual calibrated measuring blades of fine quality steel - hardened, tempered and polished for long term accuracy. 26 leaves from 0.0015 inch (0.038mm) to 0.025 inch (0.... read on

  1. @21939Available
  2. Clarke
  3. £9.67 (ex VAT)
  4. £11.60 (inc VAT)

  ViewAdd to cart

• Clarke 20oz Claw Hammer (Fibreglass Handle)

  

  Model No: CHT506Part No: 1801506... read on

  1. @21949Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke CHT275 -8oz Ball Pein Hammer

  

  Model No: CHT275Part No: 1801275... read on

  1. @21953Available
  2. Clarke
  3. £7.72 (ex VAT)
  4. £9.26 (inc VAT)

  ViewAdd to cart

• Clarke CHT280 Club Hammer

  

  Model No: CHT280Part No: 1801280... read on

  1. @21957Available
  2. Clarke
  3. £9.67 (ex VAT)
  4. £11.60 (inc VAT)

  ViewAdd to cart

• Clarke CHT287 Dead Blow Hammer

  

  Model No: CHT287Part No: 1801287... read on

  1. @21960Available
  2. Clarke
  3. £10.47 (ex VAT)
  4. £12.56 (inc VAT)

  ViewAdd to cart

• Clarke CHT112 2-Pce Water Pump Plier Set

  

  A standard pair of instantly adjustable water pump pliers, 200 mm and 300 mm, which can get to grips with a whole range of plumbing jobs. Lipped, non slip handles for a safe and... read on

  1. @21970Available
  2. Clarke
  3. £9.67 (ex VAT)
  4. £11.60 (inc VAT)

  ViewAdd to cart

• Clarke CHT170 5-Pce Int./Ext. Circlip Pliers

  

  A handy circlip plier set, comprising of 1 set of handles with 4 interchangeable tips. 1.2mm Tipped Jaw Straight, 1.5mm Tipped Jaw Straight, 1.5mm Tipped Jaw 45 degrees, 1.5... read on

  1. @21979Available
  2. Clarke
  3. £11.49 (ex VAT)
  4. £13.79 (inc VAT)

  ViewAdd to cart

• Clarke CHT266 Soft Jaw Water Pump Pliers

  

  Although designed essentially for plumbing work, these water pump pliers have much wider application. Made from high carbon steel chemically blackened, this versatile tool can b... read on

  1. @21983Available
  2. Clarke
  3. £11.32 (ex VAT)
  4. £13.58 (inc VAT)

  ViewAdd to cart

• Clarke PRO104 - 7 inch Curved Jaw Locking Pliers

  

  Chrome Moly steel steel construction with hardened and tempered steel jaws. Deeply serrated jaws help grip work piece Rivet handle construction 7 inch overall length Model ... read on

  1. @21992Available
  2. Clarke
  3. £8.82 (ex VAT)
  4. £10.58 (inc VAT)

  ViewAdd to cart

• Clarke PRO105 - 10 inch Curved Jaw Locking Pliers

  

  Chrome Moly steel construction with hardened and tempered steel jaws and rivet handle construction. Deeply serrated jaws help grip work-piece 10 inch overall length Model No... read on

  1. @21993No stock
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  View

• Clarke PRO107 - 10 inch Water Pump Pliers

  

  Superior quality pliers especially designed for plumbing work but so useful for many other service applications where a secure holding grip is needed. Manufactured from high g... read on

  1. @21995No stock
  2. Clarke
  3. £10.47 (ex VAT)
  4. £12.56 (inc VAT)

  View

• Clarke PRO110 - 8 inch Long Nose Pliers

  

  Better made for lasting performance. A quality tool with Lifetime Guarantee manufactured from high grade chrome nickel steel. Precision milled tapered jaws with induction har... read on

  1. @21998Available
  2. Clarke
  3. £8.82 (ex VAT)
  4. £10.58 (inc VAT)

  ViewAdd to cart

• Clarke PRO113 - 7 inch Linesman Pliers

  

  Super quality general purpose pliers with a Lifetime Guarantee. Just feel the difference. Made from high grade chrome nickel steel Specially hardened jaws for improved grip ... read on

  1. @22001Available
  2. Clarke
  3. £8.82 (ex VAT)
  4. £10.58 (inc VAT)

  ViewAdd to cart

• Clarke PRO114 - 9? inch Lineman Pliers

  

  Super quality general purpose pliers with a Lifetime Guarantee. Just feel the difference. Made from high grade chrome nickel steel Specially hardened jaws for improved grip ... read on

  1. @22002Available
  2. Clarke
  3. £10.47 (ex VAT)
  4. £12.56 (inc VAT)

  ViewAdd to cart

• Clarke PRO66 Bent Nose Internal Circlip Pliers

  

  Professional quality tools at a great price, these circlip pliers are an invaluable addition to your tool kit. Hardened and tempered chrome vanadium steel Spring action handl... read on

  1. @22006Available
  2. Clarke
  3. £9.94 (ex VAT)
  4. £11.93 (inc VAT)

  ViewAdd to cart

• Clarke CHT121 7-Pce Screwdriver Set

  

  A selection of seven popular slotted and cross slotted screwdrivers featuring see through handles with capped heads. These tools are designed for general purpose use and represen... read on

  1. @22082Available
  2. Clarke
  3. £9.37 (ex VAT)
  4. £11.24 (inc VAT)

  ViewAdd to cart

• Clarke CHT122 8-Pce Screwdriver Set

  

  A good value for money selection of popular slotted and cross head screwdrivers with satin black handles designed for DIY and general purpose use. 5 Slotted sizes (mm)6x38, 5x... read on

  1. @22083Available
  2. Clarke
  3. £8.82 (ex VAT)
  4. £10.58 (inc VAT)

  ViewAdd to cart

• Clarke PRO61 8-Pce A/F T-Handle HEX Key Set

  

  These comfortable T-Handle HEX bits with ball ends make it easy to apply more torque and are much preferred by professionals and regular users. They come in a neat storage rack ... read on

  1. @22118Available
  2. Clarke
  3. £15.97 (ex VAT)
  4. £19.16 (inc VAT)

  ViewAdd to cart

• Clarke PRO70 6-Pce TX-Star Wrench Set

  

  A straight shaft TX-Star spanner set covering the 12 most popular sizes and manufactured from high grade chrome vanadium steel, drop forged and finished in satin chrome. Compat... read on

  1. @22693Available
  2. Clarke
  3. £25.00 (ex VAT)
  4. £30.00 (inc VAT)

  ViewAdd to cart

• Clarke CHT334 2-Pce Clamp Set for CFB600 Bench

  

  A multi function clamp set ideally suited for use in conjunction with the Clarke CFB 600 folding bench. Quick and easy to adjust, these clamps are ideal for securing a wide var... read on

  1. @22720Available
  2. Clarke
  3. £14.04 (ex VAT)
  4. £16.85 (inc VAT)

  ViewAdd to cart

• Clarke CHT635 8pc Combination Spanner Set - Metric

  

  Set of 8 Metric Combination Spanners. Forged in chrome vanadium steel with polished head. Ring end of spanner is offset at 15° Combination Spanners: 8, 9, 10, 11, 13, 14, 1... read on

  1. @43088Available
  2. Clarke
  3. £10.47 (ex VAT)
  4. £12.56 (inc VAT)

  ViewAdd to cart

• Clarke PRO217 9 Piece Combination Spanner Set

  

  Manufactured from Chrome Vanadium steel with a polished finish Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9 & 10mm ... read on

  1. @43145Available
  2. Clarke
  3. £12.69 (ex VAT)
  4. £15.23 (inc VAT)

  ViewAdd to cart

• Clarke PRO219 Flexible Wrench & Bit Adaptor

  

  Manufactured from Chrome Vanadium steel Both ends are flexible enabling access to hard-to-reach spots ? inch square drive head accepts sockets etc ? inch hex bit adaptor with quick r... read on

  1. @43152Available
  2. Clarke
  3. £9.92 (ex VAT)
  4. £11.90 (inc VAT)

  ViewAdd to cart

• Clarke CHT686 10? (254mm) Circlip Plier Set

  

  16 x replacement tips; 2 x 0?, 2 x 15?, 2 x 45? & 2 x 90? for internal (0.12?/3mm) & external (0.108?/2.75mm) pliers Insulated comfort grip handles Weight: 1.1kg ... read on

  1. @43220No stock
  2. Clarke
  3. £13.77 (ex VAT)
  4. £16.52 (inc VAT)

  View

• Clarke CHT955 9 Piece Torx Key Set - Code 1801955

  

  The Clarke 9pc Torx Key Set is colour coded to facilitate quick and easy size identification and are secured in a hinged holder for storage.The keys are made from hardened steel to... read on

  1. @135575No stock
  2. Clarke
  3. £5.75 (ex VAT)
  4. £6.90 (inc VAT)

  View

• Clarke PRO239 4 Piece Flexi Nut Combi Wrench Set

  

  This four piece flexi nut combi wrench set is constructed of mirror finished chrome vandium and includes different sized wrenches making it ideal for various applications. Constru... read on

  1. @69083Available
  2. Clarke
  3. £31.50 (ex VAT)
  4. £37.80 (inc VAT)

  ViewAdd to cart

• Clarke CHT720 - 3/8 inch & 1/2 inch Drive Oil Filter Wrench

  

  For the removal of stubborn inch spin-on inch oil filters High strength carbon steel with satin finish Driven by a 3/8 inch or 1/2 inch square drive tool or 21mm wrench (adaptor included) Claws ... read on

  1. @69193Available
  2. Clarke
  3. £10.36 (ex VAT)
  4. £12.43 (inc VAT)

  ViewAdd to cart

• Clarke CHT721 73-85mm Oil Filter Band Wrench

  

  Articulated action allows removal of oil filters with limited access No spanner required Band automatically tightens on the filter Rubber covered handle improves grip ... read on

  1. @69194Available
  2. Clarke
  3. £8.99 (ex VAT)
  4. £10.79 (inc VAT)

  ViewAdd to cart

• Clarke CHT737 31pc Precision Screwdriver & Bit Set

  

  A handy 31 piece kit complete with soft grip screwdriver and 30 screwdriver bits of varying shapes and sizes. Ideal for a wide range of applications this is a great addition to any... read on

  1. @69207Available
  2. Clarke
  3. £8.58 (ex VAT)
  4. £10.30 (inc VAT)

  ViewAdd to cart

• Clarke CAT114 Air Hammer with Chisel Set

  

  A variable speed, robust tool ideal for removing car body panels, ceramic walls, floor tiles etc with ease. Includes a rubberised comfort grip. Maximum speed 4500 blows/min Op... read on

  1. @69306Available
  2. Clarke
  3. £16.97 (ex VAT)
  4. £20.36 (inc VAT)

  ViewAdd to cart

• Clarke CHT867 900mm Aluminium Sash Clamp

  

  This is an easy to use and lightweight, aluminium sash cramp. Length: 900mm Max opening: 820mm ... read on

  1. @75081Available
  2. Clarke
  3. £14.50 (ex VAT)
  4. £17.40 (inc VAT)

  ViewAdd to cart

• Clarke CHT953 1/4" Bicycle Torque Wrench & Bit Set (2 - 24Nm) - Code 1801953

  

  The Clarke 2-24Nm 1/4 inch Bicycle Torque Wrench & Bit Set is the perfect piece of equipment for cycling enthusiasts.Created for easy maintenance and adjustment of nuts and bolts o... read on

  1. @135573No stock
  2. Clarke
  3. £23.99 (ex VAT)
  4. £28.79 (inc VAT)

  View

• Clarke CHT952 1/2" Drive Torque Wrench, Extension Bar & Sockets ( 60-210Nm ) - Code 1801952

  

  Made from chrome vanadium steel, the Clarke 60 - 210Nm 1/2 inch Drive Torque Wrench is durable and resilient and able to stand up to the rigors of daily use in a workshop or profession... read on

  1. @135572No stock
  2. Clarke
  3. £19.18 (ex VAT)
  4. £23.02 (inc VAT)

  View

• Clarke PRO235B 1/4" Drive Digital Torque Wrench - Code 1700821

  

  Correctly tightened and torqued nuts and bolts are critical to ensuring the safe and smooth running of many machines, especially vehicles.The Clarke ¼” Driver Digital ... read on

  1. @135491Available
  2. Clarke
  3. £84.47 (ex VAT)
  4. £101.36 (inc VAT)

  ViewAdd to cart

• Clarke CHT958 27 Piece Precision Bit & Spanner Set - Code 1801958

  

  The Clarke 27 piece Precision Bit & Spanner Set provides all of the tools needed for projects around the house and workshop. Featuring the most common bit sizes and types, the ... read on

  1. @135577No stock
  2. Clarke
  3. £8.15 (ex VAT)
  4. £9.78 (inc VAT)

  View

• Clarke CHT941 22 piece Hex and Torx Key Set - Code 1801941

  

  The Clarke 22pc Hex and Torx Key Set is a toolbox essential and a must have for all DIY’ers and professional tradesmen. The robust anodised steel means the key set is able to... read on

  1. @135511Available
  2. Clarke
  3. £10.55 (ex VAT)
  4. £12.66 (inc VAT)

  ViewAdd to cart

• Clarke PRO414 - 1/2" Drive Reversible Head Torque Wrench - Code 1700820

  

  The PRO414 1/2 inch Drive Reversible Head Torque Wrench lets you ensure torque-sensitive fasteners are set to precise tolerance.Using the PRO414 means that nuts are tightened in accord... read on

  1. @124396Available
  2. Clarke
  3. £38.38 (ex VAT)
  4. £46.06 (inc VAT)

  ViewAdd to cart