CleanSpace® HALO Full Face Mask - Med/Large - CS3007

CleanSpace HALO Full Face Masks are specifically designed to work to complete the CleanSpace HALO system. Compatible with CleanSpace HALO Respirators, the Full Face Masks clip quickly onto the power units and provide good panoramic vision. Inner Orinasal Masks are made of soft silicone that readily moulds to the face and does not cause allergic dermatitis.

IMPORTANT: If you require intrinsically safe equipment, please consult your site Intrinsically Safe approvals. These Masks are NOT certified intrinsically safe.

Approvals:

• Compatible with the CleanSpace HALO (CS3000) power unit.
• AS/NZS1716: 2012
• EN 12942
• IEC 60529 IP-66
• AS / NZS 1337.1:2010 High Impact Resistance

Key Features:

• Used with the revolutionary CleanSpace HALO: light weight, no hoses or belts
• Wide panoramic visor
• Hard scratch and solvent resistant coating, Age resistant materials
• Suitable for long periods of wear
• Built-in portacount adaptor for mask fit testing
• Positive pressure airflow and inner Orinasal mask prevents fogging
• Easy breathing and no resistance even during heavy exertion
• Visor seal silicone design seals to the face for optimum protection and comfort.
• Inner Orinasal mask with unique clip-in clip-out design is easily removed for cleaning
• Mylar speech diaphragm for clear communication on the job
• Spectacle kit: Fully adjustable for all face sizes, wide frames to fit large lenses for peripheral vision; engineered stability during vigorous activity (Sold separately)
• Tear-Offs: Visor protection against scratches (Sold separately)

Suitable Applications for IP Rating 66:

Particles: 6 Protected against all dust — ‘dust-tight’;

Liquids: 6 Protected against Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3 minutes, Water Vol: 100 litres per minute, Pressure: 100 kPa at distance of 3 m).

CleanSpace HALO with Full Face Mask are suitable for chemical applications where decontamination showers are used.

Specifications:

• Weight: CS3006- 700g
• CS3007- 725g
• Hard moulded polycarbonate visor; Silicone face seal and Inner Orinasal Mask cushion.
• Nylon mask clips;
• Stainless Steel Buckle Roller;
• Mylar speech diaphragm EPDM rubber harness;
• Impact modified reinforced polypropylene exhalation valve housing; silicone O-rings
• Cleaning: Lukewarm water and mild detergent (neutral pH 6 – 8). Do not use solvents (turpentine or acetone), hot water, bleaching or chemical agents
• Storage: –10°C to +55°C (–4°F to +131°F) at <90% relative humidity. Store away from direct sunlight, grease and oil

Please refer to the Data Sheet for more information.